Gas and Oil Exploration

An industry that never rests in this great country of ours is the oil and gas exploration industry – which, in short, is the unearthing of fossil fuels which generate the energy needed to fuel myriad applications in everyone’s daily routines.

That said, there’s a lot of moving pieces and parts when it comes to this type of “exploration” and the ensuing extraction of these resources. Many such oil and gas exploration sites are abundant in challenging terrain and environmental variables that could pose distraction and ecosystem maladies if not tackled appropriately. That’s where Global Environmental Solutions comes in. Our suite of products has been confidently utilized for decades, offering the appropriate solutions needed to make sure the potential environmental issues created by the work being done onsite at oil and gas exploration facilities stays onsite.

Environmental issues to consider and act upon that come in to play when we start looking at oil and gas exportation sites:

  • Air quality
  • Land sustainably
  • Fresh water
  • Soil being disturbed at sites
  • Use of toxic chemicals
  • Hazardous wastes
  • Solid wastes and sewage
  • Radioactive wastes
  • Dust and/or sediment from stockpiles at sites
  • Dust from traffic at sites or access roads

There are numerous ways that any of the above can be compromised due to the nature of the work being done:

  • Surveying
  • Blasting
  • Drilling
  • Extraction
  • Associated incoming and outgoing site traffic

So how do we proactively combat these situations and make certain that the sites of oil and gas exploration remain safe for human and environmental life?

Let’s dive into some of the varied uses companies contract GES products for.

Oil & Gas Exploration companies have utilized us for::

To round it up, the Oil and Gas Exploration industry, is subject to myriad that adversely affect the environment if not treated appropriately and proactively combatted correctly. We at GES have been involved in many customized site treatment solutions over the years. If you need help or have questions, we have the answers and the products to keep your worksite safe, your workers safe, and the surrounding ecosystem safe – from the terrain, air, and water (seen and unseen). Let’s work through it together to fuel collaborative success.

GES: For the earth with the earth in mind.

TerraDry Waterproofing Technology

TerraDry Waterproofing Technology

Moisture: In so many facets of life, it can be a wonderful thing. In our natural environment it sustains plant and animal life and keeps things looking lush and green. In our homes, the right level of moisture keeps the air pleasant. Even in our bodies, the right level of moisture is required for proper functioning. Too little, and our skin gets dry and cracks and lack of correct percentage of moisture internally can create havoc. Our eyes become red and itchy. But there’s one area where moisture (especially too much of it) can cause some serious problems: roads and pathways or any hard surface that will receive traffic.

When it comes to building proper roads and pathways, moisture must be at a fairly precise level. While a range of 7-14% is acceptable in the base aggregate, around 12% is ideal. At this level, the aggregate is just damp, which is perfect for making a road. The issue that so often arises is that it is nearly impossible to maintain this percentage of moisture. Changes in the weather bring along wind, rain, elevated humidity levels, and temperature, which all impact moisture levels. When soil becomes wet, water molecules separate soil particle bonds, thus becoming destabilized, eroded, and muddy. When this occurs, load bearing strength is diminished and the roadway loses its solid foundation.

To combat this problem, we developed TerraDry®. TerraDry® waterproofing technology hydrophobizes soil and aggregate particles making them completely waterproof so there is no moisture penetration. With no moisture penetration there is no mud, no erosion, and no loss of structural integrity.

Up until now, fixing moisture problems in aggregate was a costly and time-consuming endeavor. Once a road or pathway became damaged, the only way to fix it was to dig it up, haul out the inferior aggregate, and replace it with proper materials. TerraDry® allows for the existing aggregate to be treated in place. As TD permeates into the capillary network of the inferior aggregate, it fills this network of moisture channels with resin, thereby transforming the poor-quality road base into strong, stable material. No need for digging and hauling, and no need for purchasing expensive, new material. Lowered environmental impact also results. It’s a win-win.

TerraDry® waterproofing technology is also an excellent choice in areas that go through a lot of freeze/thaw cycles in the wintertime. Equally (if not more) damaging than erosion is freezing. As thawing temperatures allow moisture to penetrate beneath the surface of a road or pathway during the day, this moisture then freezes and expands at night, cracking and heaving the road, and creating a serious issue for its stability and function. TerraDry® prevents capillary water uptake, eliminating the destructive force of freezing water.

With TerraDry® you can not only prevent costly damage from happening in the first place, but save time and money on any repair projects that may come your way.

Have questions about what TerraDry® can do for you? Give us a call. Our friendly, knowledgeable staff is here to help so that you can complete your next project with less worry, less time, and less expense. Contact GES today.

 

Going Green Across the Board – Creating Safe, Stabilized Terrain, Safely

GES Green Across the Board

Here’s the thing – soil stabilization and dust remediation are challenges that are faced and dealt with on a daily basis around the globe. There are myriad options, as we discuss at length throughout the sources on our own site here, and as you’ll find in your own research. Some options are cheaper than others, as is the case with any market you dive into. That’s what competition is all about. The thing is, sometimes cheaper isn’t better. Especially in this industry. In fact, cheaper can perhaps lead to grave consequence. You see, when you’re dealing with soil and other moving pieces and parts (dust, particles, etc.), you need to be conscious of what’s happening in and around the site you’re treating. It’s imperative, as a race, that we’re not causing more harm to the ecological environment that surrounds the areas we’re working with / in.

Going green has different implications. Going green from our vantage point is not only about saving money, but also, utilizing a soil stabilization and dust remediation product that is not causing harm to the environment. It’s strengthening it – in more ways than one.

Global Environmental Solutions’ “green,” environmentally-friendly products continue to be used by professionals in the construction industry, demolition, contaminated soils sites, the mining industry, militaries around the world, and energy sectors to preserve air quality, save energy, reduce strain on natural resources, and lower costs of completing various dust control, erosion control, sediment control and stabilization projects.

As the manufacturer and supplier of the very best-in-class soil stabilization products since 2001, Global Environmental Solutions supplies a wide array of green products worldwide to benefit the environment as well as reduce cost and increase effectiveness for all industries that must deal with hazardous dust or require soil stabilization.

The development of these extremely effective products came about because of the ever increasing need throughout the world to keep the environment clean in an ever more active world. The soil stabilization industry needs to have a vision that allows for environmental sensitivity and the transparency to create products that are not only effective but also totally safe for the environment.

For example, DustLess® is the trademarked synthetic organic fluid dust control recognized worldwide as the most effective product in its class. DustLess® works without water to provide dust control for up to a year with a single cost effective application. This is important (and should be), and is GES’ legacy to the world we live in.

Questions or comments? Reach out!

Global Environmental Solutions: For the Earth, With the Earth in Mind.

Comparing DirtGlue® Polymer with other Latex Polymer Emulsions on the Market

Dirtglue Polymer Comparison

We get a lot of questions with regard to our DirtGlue® polymer, the ensuing line of products containing this technology, how it responds to varying application variables, and how it stacks up to other polymers on the market. It’s a fair thought to have, and we’re happy to answer it for you.

First things first:

What is DirtGlue® polymer emulsion?

DirtGlue® is an environmentally safe, powerful acrylic polymer emulsion that produces highly effective control of dust and erosion thereby stabilizing the soil. DirtGlue® polymer emulsions are designed to coat and bond soil particles together. They are formulated to fill the microscopic spaces between soil particles that are essentially in direct contact with each other and will achieve their highest level of performance under those conditions.

How does DirtGlue® compare to other polymers and copolymers?

It’s the goal of Global Environmental Solutions to offer a line of products that harness the advantages of latex acrylic polymer emulsions. Compared to other latex polymers like Polyvinyl Acetate (PVAs) or Vinyl Acetate Ethylene polymers (VAEs) that are used in the same industry, pure acrylics offer crucial and industry relevant advantages:

  • Superior bonding strength (more durable film, tougher crust).
  • High UV resistance (increased longevity).
  • Superior hydrophobicity (extremely water resistant).

In order to use acrylic polymer effectively, GES decided to address two functional attributes. First, the temperature range in which acrylic polymer could cure sufficiently was felt to be too narrow. Second, although acrylic is less susceptible to water reabsorption than the other latex products, it was felt that improvement was necessary.

GES has spent years researching and developing our unique, eco-friendly suite of products to study and improve the performance of the acrylics for soil stabilization while keeping the substantial advantages already inherent in the product. Our research and development efforts involved fine tuning a blend of the acrylic polymer with proprietary additives. The result of these efforts has created a powerful acrylic polymer with the
following outstanding characteristics:

  • High resistance to UV degradation.
  • Superior bonding strength in all applications.
  • Expanded temperature range, applications are also successful at low temperatures.
  • Enhanced flexibility of cured product, brittleness has been eliminated, and durability has been 
increased in freeze-thaw cycles.
  • Extreme water resistance – the cured products are nearly impervious to water.
  • Smooth and consistent film forming capabilities at low temperatures.

Despite the obvious advantages of pure acrylic polymers for the soil stabilization industry, most other companies use vinyl based polymer emulsions and copolymer blends of vinyl like PVAs or VAEs.

These vinyl-based products are slightly cheaper, offer relatively good flexibility, and have certain bonding capabilities. However, the disadvantages outweigh these characteristics.

Disadvantages of vinyl based products:

  • Low UV resistance.
  • Average bonding strength for most applications.
  • Susceptible to water reabsorption after long-term, continuous exposure to water weakening the 
product substantially (poor hydrophobicity).

There is another, lesser-known product that is used in the soil stabilization industry. This product is known as ultra filtered (UF). Its only advantage is a very low cost. It is typically made up of a blend of latex polymers, which is derived from the wash water of the polymer tanks between batches of the polymer making process.

The process involves extracting clean water from polymer-contaminated water that has been used to flush the tanks and lines after making the various latex polymers. Once most of the water has been extracted the remaining water that is contaminated with a blend of various latex polymers is either disposed of or sold extremely cheaply to the dust control industry.

There are several problems with this product:

  • The major that it’s made of a blend of many different materials and is always different. There is no consistency of product and therefore no consistency of application quality.
  • The market strategy of most, if not all other vendors is to buy huge quantities of the UF product for extremely low cost. They keep reapplying, which in most cases is many times due to the weakness and inconsistency of the product.

What have we learned?

We believe that DirtGlue® is the only polymer soil stabilization company that goes through an extensive testing program of all of the polymer before it becomes DirtGlue®. We have several very specific characteristics that the polymer must have in order to become DirtGlue®. Some of these are film forming quality, film forming temperature range, film strength, bonding strength, UV stability, hydrophobicity, and unconfined compressive strength (wet & dry). We have a chemist that has developed tests for all of the above to ensure consistent product and therefore consistent application and performance.

Global Environmental Solutions has positioned its products differently than all other latex polymer emulsions in the soil stabilization industry. We use only acrylics for superior UV stability and strength. These desirable characteristics are enhanced through the use of proprietary additives. Additives also permit the use of these better quality acrylics at a wide range of temperatures. Additives give the superior flexibility to an otherwise brittle product and create a tough, flexible film that is nearly impervious to water reabsorption. For these reasons DirtGlue® is a superior choice for any soil stabilization solution.

At a glance:

DirtGlue DVA Acrylic Ultra Filtered UF
% Solids: 50 35 –55 40 – 50 05 – 30
UV Stability Excellent Poor Good Poor
Flexibility Excellent Good Poor Fair
Bonding Strength Excellent Good Very Good Poor – Good*
Film Forming Excellent Good Fair – Good Poor – Fair
Application Temperature Range (ºF) 38 – 120 50 – 110 70 – 110 unknown*
PH 7 – 8 4 – 6 8 – 10 unknown*
Hazard Rating none none none unknown*
Resistance to Water (completed application) Excellent Poor Fair unknown*

*UF latex polymer products have a wide variation in quality and consistency due to their origins.
The above information is typical of the various latex polymers. There may be variations that fall outside of the typical range.

Feel free to give us a shout if you have any further questions or are in need of further information on Global Environmental Solutions and our DirtGlue® line of products!

Prepare Yourself (and Your Budget) for Proper Park and Recreational Facility Care

Prepare Yourself (and Your Budget) for Proper Park and Recreational Facility Care

Though we’ve been inundated with snow lately here in the Northeast, spring is, as they say, right around the corner. Well, from a technical standpoint, it’s here. That said, Parks and Recreation organizations here and around the country are prepping a piece of their annual budget to repair damaged and/or weathered elements of their facilities. There’s a lot of moving pieces and parts to a Park and Rec destination, and, quite literally, depending on environmental factors, these moving pieces and parts actually move.

If you’re in repair mode, what are the best solutions to avoid further damage and/or future washout and compromised hiking trails, ballparks, bike paths, landings, beachfronts, playground elements, etc.? If you’re in the process of planning a new facility or expanded facility offerings, how do you combat these potential environmental factors at the outset?

Global Environmental Solutions. That’s right. GES. Our suite of environmentally friendly DirtGlue® products are the ideal tool for tackling environmentally difficult obstacles.

There are myriad challenges with regard to how to treat the terrain in different parts of the park depending on how utilization of the varying pieces will be used.

You want to:

  • Eliminate dust
  • Have firm soil that isn’t being dispersed all over the place due to inevitable movement (of both the earth from wind and water erosion, as well as all of the various types of traffic pounding throughout the park, from feet to bikes, to cars, trucks, trailers and RV’s in parking areas…)
  • Have clean, aesthetically pleasing landscaping
  • Avoid potholes and other applicable dangers for people utilizing your facility

There’s lot to it.

Luckily, we’ve got the solution to best outfit all of the many “environments” that exist within the environment of a parks and recreation facility.

Consider the following:

DirtGlue Polymer® – Our flagship erosion control product fit for solid use in vast applications around a park and recreation facility. DirtGlue® polymer emulsion is a powerful, high-tech soil stabilization bonding agent specifically engineered to bond soil particles together. A non-hazardous product, DirtGlue® polymer contains no harmful chemicals, will not adversely affect people, animals or aquatic life.

TerraDry® – The ultimate solution to making the road less traveled, a safer and more stable option. The benefits of using TerraDry® are enormous. The use of “in-situ” cohesive and inferior soils saves time, expense, and resources. No longer is there a need to remove tons of inferior soil and haul it away to a landfill. Additionally, the cost of purchasing expensive aggregate is also eliminated. Your project costs are greatly reduced with roads back in service sooner with less disruption to the local infrastructure and population.

DustLess® – The name says it all. Where there’s dust, make it dustless. DustLess® soaks into the individual soil/dust particles and making them too heavy to move, thus eliminating dust and providing fugitive dust control. It does not form a crust and never evaporates, thereby being unaffected by traffic. DustLess® lasts a very long time, often giving you 9-12 months or more of dust control with one application.

ArenaKleen® – ArenaKleen®, like the aforementioned DustLess® product, eliminates dust. With this product, it makes for healthier environments around high impact, highly traveled paths and tracks. ArenaKleen® is formulated to absorb into each individual soil particle, meaning that soil particles remain in direct contact with each other, ensuring firm footing, and excellent traction with no stickiness, and thus no tracking.

DirtGlueDry® – Ideal for paths adorned with pavers, tiles, brick, whatever you’re using for footing and aesthetics. DirtGlueDry® is a powerful, high-tech polymer specifically engineered to be mixed with sand to eliminate washouts and erosion between pavers, bricks, patio blocks, and flagstones in walkways, driveways, patios, etc. The added strength helps keep the pavers in place and helps prevent weeds and all types of vegetation from growing in the joints and eliminate insects such as ants.

PotHoleGlue™ – Don’t just fill in potholes. Eliminate their existence and while you’re at it, their future existence as well. The three-component system boasts excellent bonding capabilities to fine particles, asphalt, aggregate, and other applicable substrate – sealing to the edge of the break. PotHoleGlue™ possesses superb curing characteristics at or above freezing temperatures, which is ideal during the winter months – the peak season for such road blemishes.

CompoMulch™ – When you start in on re-growing or improving on vegetation within your park and rec facility, you’re going to want something that helps those plants germinate and sprout quickly, healthfully, and safely. As is custom in all of our vast line of products, CompoMulch™ is a forward thinking solution to surrounding terrain and soil preparation as it pertains to hydroseeding and planting needs. While similar products exist in the market, our dutifully prepared “solution” which combines two preparation standards in vegetation development.

DGE Polymer Pavement System™ – If you’re thinking about paved surfaces for travel, think no further than our cutting-edge DGE Polymer Pavement System™. A road is not merely “pavement’. The DGE Polymer Pavement System™ consists of a solid foundation, a waterproofing agent (TerraDry® ) and a powerful, high-tech bonding agent (DirtGlue® Industrial). It is significantly less expensive to construct and maintain than Asphalt or Concrete while producing a permanent, hardened driving surface that equals or exceeds the strength and lifespan of Asphalt at the sample application thickness. It requires less construction equipment than asphalt or concrete by reducing the need to remove inferior soil and haul in aggregate base material, thus reducing construction time! It insures a durable smooth surface that resists erosion and traffic shear. This fully functioning system prohibits mud in the wet season and dust in the dry season.

MasonProof™ – If you’re looking for protection on any of your park and recreation facility structures at the foundation level, MasonProof™ is the answer. Engineers, construction contractors and builders deal with the destructive chemical reactions cement-based building materials suffer due mainly to the exposure to water, which acts as a reaction medium or solvent in this destruction. Film formers/barrier type technologies (coatings) have been widely used, but due to weathering and ultra violet exposure these coatings have limited lifespan and thus periodic reparative applications are required. This issue has been revolutionarily remediated with the all-inclusive protective properties of MasonProof™.

In short, we’ve got a whole lot of answers to your existing and/or potential troubles. All you need to do is give us a shout and we’ll get to work.