The construction industry and Global Environmental Solutions go hand in hand. We created our suite of products with the idea of new construction in mind – bolstering the integrity of the surfaces in use while maintaining the integrity of the earth as it is shaped to best serve the project. The world is our sandbox, but we must be sure to not cause damage to our natural resources while we reimagine the way the earth’s surface can be worked by us.
Let’s take a quick look at what some of our products are doing to aide in seamless, strengthened and environmentally friendly construction.
DustLess®: As workers create temporary construction roads around the construction site, dust remediation as a must as the bulk of construction vehicles churn up a lot of dust as the roads dry out and are in a constant state of active transport usage. The dust kicked up can harm equipment, the ecosystem, and the health of the workers – as well as compromise surrounding communities. Keeping dust controlled and continually managed is achieved through the use of DustLess® – an environmentally safe dust suppressant that eliminates the need to water and does not dry out. Clear and odorless, DustLess® is highly refined and proven to be non-toxic to humans, animals, marine life and vegetation. DustLess® dust suppressant comes ready to use (no water or mixing required), making it perfect for applications at construction sites, unpaved roads, gravel parking lots, mining sites, and quarries.
DirtGlue® polymer: Like DustLess®, DirtGlue® polymer is a means of prepping the construction site for action. DirtGlue® polymer primes and readies the terrain to protect it against wind and water erosion by crusting the surface anywhere on the construction project that may be susceptible to any form of erosion. You don’t want loose soil on the construction site unless it is held in place to eliminate dust, sediment and erosion. All loose, disturbed soil should be protected with DirtGlue polymer in order to eliminate the threat of washout or an embankment collapse. DirtGlue® polymer is a liquid concentrate that, when diluted with water and applied to the soil surface, bonds the individual soil particles together. The application then dries to form a “crust” that strengthens the surface of the soil enabling it to prevent dust, sediment, and erosion for extended periods of time providing soil erosion control and embankment stabilization. DirtGlue® polymer and associated products are also quite helpful when it comes to achieving Stormwater Pollution Prevention Plans compliance.
MasonProof™: is a highly concentrated masonry waterproofing agent that tackles anything a construction project needs for complete, long-term waterproofing the different structural challenges that come with new and/or improved masonry building installations. MasonProof™ is the waterproofing agent of choice when it comes to the application of concrete walls, concrete floors, concrete blocks, bricks, tiles, pavers, paths, driveways and so much more. Engineers, construction contractors and builders deal with the destructive chemical reactions cement-based building materials suffer due mainly to the exposure to water, which acts as a reaction medium or solvent in this destruction. Film formers/barrier type technologies (coatings) have been widely used, but due to weathering and ultra violet exposure these coatings have limited lifespan and thus periodic reparative applications are required. This issue has been revolutionarily remediated with the all-inclusive protective properties of MasonProof™. Choosing MasonProof™ for masonry waterproofing applications increases water-resistance and provides long-term protection, which is essential for preservation of the structure and preservation of the owner’s dollars. Water is masonry’s worst enemy – MasonProof is masonry’s best friend because it really works.
DirtGlueDry™ powdered polymer: is a powerful, high-tech polymer specifically engineered to be mixed with sand to eliminate washouts and erosion between pavers, bricks, patio blocks, and flagstones in walkways, driveways, patios, etc. The added strength helps keep the pavers in place and helps prevent weeds and all types of vegetation from growing in the joints and eliminate insects such as ants. Using DirtGlueDry™ powdered polymer as the binder for the infill material for your paver project allows the project to be cleaned with a leaf blower or pressure washer without losing the joint infill.
DGE Polymer Pavement System: When the project is a road, DirtGlue® Polymer Pavement System is the ultimate solution for roadway integrity, stabilization, and power. The DGE Polymer Pavement System consists of a solid foundation, a waterproofing agent (TerraDry®) and a powerful, high-tech bonding agent (DirtGlue® Industrial). It is significantly less expensive to construct and maintain than Asphalt or Concrete while producing a permanent, hardened driving surface that equals or exceeds the strength and lifespan of Asphalt at the same application thickness. The DGE Polymer Pavement System requires less construction equipment than Asphalt or Concrete by reducing the need to remove inferior soil and haul in aggregate base material, thus reducing construction time! It insures a durable smooth surface that resists erosion and traffic shear. This fully functioning system eliminates mud in the wet season and dust in the dry season. The DGE Polymer Pavement System is safe for the environment.
DirtGlue® & CompoMulch™: Hydroseeding and Hydromulching with DirtGlue® & CompoMulch™ are the solution for the aesthetic and landscaping parts of a construction project. From hydroseeding/mulching to general terrain washout worries, these two products are powerful and proven. As is custom in all of our vast line of products, CompoMulch™ is a forward-thinking solution to surrounding terrain and soil preparation as it pertains to hydroseeding and planting needs. It is the combination of two highly effective components that give you unmatched vegetation development. The CompoMulch™ hydromulch tackifier formulation does not contain any wood and very little paper as is common in many fiber or mulch products used in hydroseeding. It uses 30% compost, so it provides a better growing medium for the vegetation and is easier to apply because of its unique consistency. CompoMulch™ helps hydroseed / hydromulch equipment resist nozzle clogging because of the compost, as well as the size and type of fiber, which comprises our special blend. DirtGlue® polymer is a superior tackifier for the hydromulch system described above. Unlike conventional tackifiers, DirtGlue is completely waterproof once cured and will eliminate washouts even in the worst, torrential rain events. It preforms better than any other tackifier on the market!
DirtGlue® polymer penetrates the surface binding with the soil to form a tough, durable, three-dimensional matrix layer of protection and soil stabilization. Combining superior film strength and adhesive properties, DirtGlue® polymer is the ideal solution for dust control in non-traffic areas, stockpile capping, and stabilizing slopes and embankments. When hydroseeding, substituting DirtGlue® polymer in place of other soil stabilization products increases germination rate, decreases germination time, and eliminates washouts and rilling while providing better erosion control.
Whew. That was a mouthful. The long and short of it is this: If you’re planning or spec’ing a construction project and you don’t have Global Environmental Solutions in mind as a working piece of your operative mission, give us a call. We’ll show you what you could be missing out on and prove to you that these products are going to help your own initiatives wind up second to none. When quality and conservation are vital, GES is your welcoming, powerful partner.
Global Environmental Solutions: For the earth, with the earth in mind.
To get a brief overview of all our products and their unique attributes, click here.